EverFocus ED Series Specifiche Scaricare il pdf (Pagina 3)

INSTALLATION

1. Loosen the 4 fix screws on the housing cover by using the attached wrench (Figure 1).

Please pay attention not to damage the lens.

2. Remove the camera.

To remove the camera, first unplug the wire connection on the back of the camera. Then

loosen the 2 locking screws on the camera base, push the camera base to the right (toward

heater direction, as shown in Figure 2), remove the camera from the mounting base.

Reinstall the camera and the cable while the base mounting is completed.

Figure 1

Figure 2

Locking Screws

Vari-Focal Lens

1 2 3 4 5 6 7 8 ... 11 12

Nessun commento

EverFocus ED Series Specifiche Pagina 3