EverFocus EMV200 DVR Manuale Utente Pagina 11
- Pagina / 102
- Indice
- RISOLUZIONE PROBLEMI
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
4
1) SD Card Slot: Slot to insert SD card.
2) IR Receiver: Receiver for IR remote control.
3) Alarm Input(2), Alarm Output(1) & RS232:
Alarm Input (2) - Connect up to 2 alarm inputs, selectable between N.O./N.C. contacts.
Alarm Output (1) - N.C or N.O type alarm out (form “C”).
RS232 - Connect to RS232/RS485 compatible device.
4) Power LED: This LED ON indicates Power on.
5) Network Connector: RJ-45 network connection 10/100Mbps Ethernet. There are two LEDs on the LAN
jack; Green LED means network is connected, amber LED flickers when data is being exchanged.
6) Philips mounted/Pin-torx: Use Philips screw for an easier mounting to prevent over-tightening. Use Pin-
torx for a safe installation to prevent cam-out. A screwdriver is included for Pin-torx.
REAR PANEL
During initial setup you will be connecting your DVR to multiple input and output devices. This is done through the
rear panel.
Figure 1-2 Rear Panel
○
○○
○
1
GPS Antenna: Connect to the GPS antenna.
○
○○
○
2
Power Input and Switched Ignition: 1 pin is reserved for power input; connect to 10V~36VDC power source.
1 pin is for ignition control; connect to the other vehicle devices to avoid excess power consumption at ignition.
- User Manual 1
- EMV200 DVR 2
- Instruction Manual 2
- SAFETY PRECAUTIONS 3
- TABLE OF CONTENTS 5
- 1 PRODUCT OVERVIEW 8
- 1.2 PACKAGE CONTENTS 9
- 1.3 SPECIFICATIONS 9
- 1.4 FRONT PANEL 10
- REAR PANEL 11
- 1.5 SYSTEM CONNECTION 12
- 1.7 INSTALLATION OF EMV200 13
- LCD Monitor 16
- 1.9 AUDIO INSTALLATION 17
- 1.11 USB-Mouse installation 18
- 1.12 NETWORK CONNECTION 19
- 1.13 FINAL INSTALL PROCESS 20
- 2 MOUSE OPERATION 21
- 3 CONFIGURATION 23
- 3.4 SEARCH 25
- 3.5 ARCHIVE (USB) 29
- 4 DVR CONFIGURATION 30
- 4.2 CAMERA SETTING 31
- 4.3 RECORD SETTING 33
- Figure 4-7 Record Settings 34
- 4.4 ALARM/GPS 35
- Figure 4-21 Alarm – GPS Speed 43
- 4.5 Date/Time Setting 46
- 4.6 Display 47
- Figure 4-27 Display-OSD 48
- Figure 4-28 Display-Layout 49
- 4.7 NETWORK SETTING 50
- Figure 4-30 Network Menu 51
- 4.8 SYSTEM 59
- Figure 4-40 System-User-Add 60
- Figure 4-41 System-User-Edit 60
- Figure 4-43 System-Disk 63
- Figure 4-46 System-Log 64
- Figure 4-47 Log List 65
- Figure 4-48 System-Settings 65
- Figure 4-49 System-Service 66
- 4.9 INFORMATION 67
- 5 Networking Overview 68
- 5.4 Virtual Ports 69
- 5.5 Pre-Installation 69
- 6.1 CONNECTING TO EMV200 78
- 6.3 REMOTE LIVE VIEW 84
- 6.4 REMOTE PLAYBACK 86
- 7 EVERFOCUS DDNS SETUP 87
- 9 SD CARD READER 92
- 9.2 Basic Operations 93
- 9.3 Search Video 93
- 9.4 Archive and Snapshot 94
- 10 TROUBLESHOOTING 95
- Appendix 96
- Input Event 97
- Alarm Duration 97
- VALUE SELECTION RULES 99
- Case 3: 100
- Record With: Preset Setting 100
- APPENDIX C: REMOTE CONTROL 101
- EverFocus Electronics Corp 102
Prodotti e manuali riguardandi Sistemi di controllo di accesso EverFocus EMV200 DVR
(79 pagine)
(2 pagine)
(71 pagine)
Uponor Thermostats user manuals
The list of Uponor Thermostats products contains 6 user manuals for 3 models. All pdf user’s guides are available for download or viewing online.
Commenti su questo manuale