EverFocus Eptz3000 Manuale Utente Scaricare il pdf (Pagina 22)

2-21

5. Align the two screw holes on the bottom of mechanical part to the two bolts on the

base of the housing, and twist the mechanical part clockwise a little bit in order to

engage it with the base. Screw the two bolts on the base, and then connect and fix

the connection bus to the PCB board on the mechanical part.

Notice: The camera module on the mechanical part is very sensitive. Please be careful

when installing this part.

6. Remove the lens protection cover before installing the bulb. Align the 3 bolt holes

into the 3 housing bolt holes, and screw three M3 bolts with the attached small

screw driver to fix the bulb.

GLOVE

M3 Blot

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 38 39

Nessun commento

EverFocus Eptz3000 Manuale Utente Pagina 22